Originally built in 2006, this 63’ aluminum catamaran was purchased by Marine Imaging in 2025 and is currently undergoing modifications before starting her new life as a survey vessel.

When fully staffed and provisioned for 24 hour survey operations Precision carries a research team of six scientists and technicians and a vessel crew of four operating on 12 hour shifts and can remain offshore for five days.

The Control Room features an 8’ x 30” counter with two designated work stations, each station having the option of multiple monitors, and ample project storage.

The aft deck has 310 sq feet of working space with a removable center transom section. The twin dive platforms flank the A-Frame crane and are accessed from doors in the transom.

The hydraulic A-frame crane, installed in 2025 on the aft deck, has three load points and a total lifting capacity of 3,000 lbs. It’s range extends from 3’ on deck to 6’ aft of the transom.

The side mount instrument pole is located on the starboard side and is rated for a single instrument of up to 100 lbs. When deployed the pole extends 2’ below the hull.

The accommodations onboard Precision include ten berths, two heads, two showers and a fully equipped galley. Each of the two staterooms include air conditioning, privacy curtains and personal storage.

Precision has an independent hydraulic thruster system for station keeping. Sleipner 10” thrusters are located in the bow and stern of each hull, arranged in a vector formation and powered by an independent Caterpillar engine. Each thruster is capable of generating 528 lbs of thrust. The four thrusters are control JPOS Dynamic Positioning controller, allowing the vessel to hold station in all operational conditions.

Precision Specs

Length: 63’ / 19.2m
Beam: 25’ / 7.6m
Draft: 5.5’ / 1.7m
Air Draft: 35’ / 10.7m 
Weight/Displacement: 57 Tons

Work Deck Footage: 310 sqft
A-Frame Capacity: 3,000 lbs

Top Speed: 16kn @ 70 gph 
Cruising Speed: 9.5kn @ 16gph
Range (w/reserve): 1800 nm @ crusing speed 

Precision Amenities

Refridgerator 
Stove
Microwave
Oven
Chest Freezers (2)
Air Conditioning
Staterooms (2)
Berths (10) 
Shower
Washer & Dryer
Exterior Shower
Fresh & Salt Water Rinse Hoses 

Precision Electronics

Furuno Radar
Garmin Chartplotter
I-Comm Radios (x2)
Simrad Autopilot
Garmin AIS
Raymarine Chartplotter
Furuno Navigation Indicator

Precision Propulsion

Caterpillar C-12 Diesel Engines
Vetus Electric Thruster
Sleipner Hydraulic Thrusters

Precision Mechanical

A-Frame Crane
Side Mount Pole
Hydraulic Quick Disconnects

Precision Tankage

Fuel: 3600 gal
Water: 450 gal
Black Water: 450 gal

Catapult Numbers

Catapult Features

• Top Speed: 25 knots
• Cruising Speed: 15 knots
• Estimated Range: 250nm
• Fuel Capacity: 250 gallons
• Passenger Capacity: 6
• Length: 35′
• Beam: 13’6″
• Draft: 3′-6″
• Air Draft: 12′

• CMID Inspected
• 110 sf aft work deck
• 800lb aft davit with electric winch & hydraulic capstan
• 400lb midships davit with electric winch
• Northern Lights 6kw generator
• Galley
• Internal Head
• Heating & Air Conditioning
• Dive ladder

Catapult Electronics

• Dual Lowrance HDS10 Multifunction screens
• Furuno FCV-620 Depth Finder
• Garmin 800 AIS
• Radar
• Primary & Secondary Radios
• Search light
• LED deck lights

Catapult Safety Equipment

• EPIRB with hydrostatic release
• Type I Personal Floatation Devices (Life Vests) (10)
• Class IV Throwable Life Ring
• 8 person life raft
• Throwable Life Line
• First Aid Kits (2)
• DSC enabled VHF radios
• AIS
• 10-B Fire extinguishers (2)
• Visual signaling kit
• Red aerial flares with launcher
• Handlheld red flares
• Handheld orange smoke flares

• Applanix Surfamaster GNSS system with dual GA830 antennae
• HYPACK Survey and Office with operator
• Remotely Operated Vehicles (ROVs)
• Sonardyne MiniRanger USBL system with two nano beacons
• Side mount pole for Multibeam, USBL, etc